User`s manual

Disk Status Codes
F-7
F
Table F-3. ATA/ATAPI Controller-Dependent Errors
Code Description
$00 Good Status
$01 Error Register contents valid
$02 Index error (vendor speciÞc)
$04 Correctable data error
$08 Data transfer failure (Data Request from device missing)
$10 Bit 4 error (vendor speciÞc)
$20 Device fault
$40 Device not ready
$80 Device busy (command/data transfer in progress)
$F1 Controller initialization failure
$F2 Invalid parameter
$F3 Sector size not supported
$F4 Command not supported
$F7 Data Overßow
$F8 Controller Configuration Error