User`s manual

PPCBug Messages
C-3
C
Concurrent Mode Active
The speciÞed port echoes the system
console terminal after CM command
Data = $nn
nn is truncated data cut to Þt data Þeld
size during BF or BV commands
Effective address: nnnnnnnn
Data location (BC, BF, BI, BM, BS, BV,
and DU commands); Location of
program execution (GD, GN, GO, and
GT commands)
Effective count: &nnn
Number of data patterns acted on
during BC, BF, BI, BS, or BV
commands; or the number of bytes
moved during DU command
Enter Menu #:
Enter a System Menu option.
Escape character: $HH=AA
Exit code from transparent mode, in
hex (HH) and ASCII (AA) during TM
command
Initial data = $XX, increment = $YY
Data was truncated to Þt the Þeld
length selected in the BF or BV
commands. XX is starting data and YY
is truncated increment.
-last match extends over range boundary-
String found in BS command ends
outside speciÞed range
Logical unit $XX unassigned
Port number referenced in PA or PF
command is unassigned. $XX is the
port LUN.
M=
Prompt for macro deÞnitions during
MA command
NO MACROS DEFINED
No macros have been deÞned (when
using MA command to list available
macros)
No printer attached
No printer was attached prior to
running the NOPA command
Table C-2. Other Messages (Continued)
Message Meaning