User`s manual

Other Messages
C-2
C
Other Messages
*** Invalid LUN ***
Invalid controller and device selected
in IOP or IOT commands
*** Invalid Range ***
Invalid range entered in BC, BF, BI,
BM, BS, or DU commands
*** Missing Argument ***
Necessary argument was not entered
NON-EXISTENT MNEMONIC
Entry error in MM command with DI
option
NON-EXISTENT OPERAND
Entry error in MM command with DI
option
part of S-record data
Non-hex character is encountered in
data Þeld in LO or VE commands
RAM FAIL AT $ nnnnnnnn
Parity is not correct at address
$nnnnnnnn during a BI command
STRING POOL FULL, LAST LINE DISCARDED
String pool size (511 characters) is
exceeded during MA command
The following record(s) did not verify
S
. . . . . . . . ZZ . . . . . . . . CS
Match not found in the LO or VE
commands. ZZ is the non-matching
byte and CS is the non-matching
checksum.
Verify passes
Successful VE command
Table C-2. Other Messages
Message Meaning
PPC1-Bug>
Debugger prompt
PPC1-Diag>
Diagnostic prompt
At Breakpoint
Program has stopped at breakpoint
Autoboot in progress... To Abort hit <BREAK>
Autoboot has begun
--Break Detected--
BREAK key on console has stopped
operation
COLD Start
Vectors have been initialized
Table C-1. Debugger Error Messages (Continued)
Debugger Error Message Meaning