User`s manual

System Menu

B-5

1) Continue System Start Up

2) Select Alternate Boot Device

3) Go to System Debugger

4) Initiate Service Call

5) Display System Test Errors

6) Dump Memory to Tape

Enter Menu #:

Using the Service Call Function

Operation

The service call function displays a series of interactive prompts.

Any question requiring a Y or N answer defaults to N if only

Return is entered.

First, the system asks the modem type:

Modem Type:

0) Terminal - - 9600

1) Manual - - 1200

2) Internal - UDS-2122662 1200

3) Internal MVME712A/AM UDS-V.22b 2400

4) Internal MVME714M UDS-V.22b 2400

5) External MVME733EXT UDS-V.32/V.42b,FasTalk 9600

6) Internal MVME733F UDS-V.32/V.42b 9600

Your Selection (2)? 0

Select 0 (Terminal) to connect any ASCII terminal in place of a

modem via a null modem or equivalent cable. This is useful in

certain trouble-shooting applications for providing a slave terminal

without the necessity of dialing through a modem. Refer to

Terminal Connection on page B-11.

Select 1 (Manual) connects directly to the modem in an ASCII

terminal mode, allowing any nonstandard protocol modem to be

used. Refer to Manual Connection on page B-9.

ÓUDSÓ signifies an internal modem that is compatible with the UDS

modem protocol.