User`s manual

Menu Items
B-2
B
*Enter Alternate Boot Device:
Controller:
Drive :
File :".
The devices supported by the PPCBug are listed in Appendix E.
After entry of a selected device and a carriage return, the menu is
redisplayed for another selection (normally Continue System
Start Up).
Go to System Diagnostics
Enter 3 to go to the PPCBug diagnostics directory. You may return
to the System Menu by entering the MENU command at the
PPC1-Diag> prompt.
Initiate Service Call
Enter 4 to initiate a service call.
This function is normally used to complete a connection to a service
center which can then use the concurrent mode (the concurrent
operation of a modem connected terminal and the system console)
to assist a customer with a problem.
Refer to Using the Service Call Function on page B-5 for details on this
menu item.
Display System Test Errors
Enter 5 to display any errors accumulated by the extended
confidence test suite when last run. This can be a useful field service
tool.
Dump Memory to Tape
Enter 6 to save an image of memory on to tape for later analysis. The
output of tape dump is two or more files on the user-specified
controller and device. The first file (File 0) contains information