User`s manual

.FORKMPUR Function

5-98

Field descriptions:

GPR00 to GPR31 general purpose registers

FPR00 to FPR31 floating point registers

SR00 to SR15 segment registers

SPR0 to SPR1023 special purpose registers

IP instruction pointer

MSR machine state register

CR Condition register

FPSCR floating point status and control register

CPUIEN CPU interrupt enable

Refer to the microprocessor and CPU user manuals for a detailed

description for each of these registers.

Entry Conditions

R03 ==> MPU number (i.e., 0 - 1)

R04 ==> Address (word) Starting address of register set

Exit Conditions Different from Entry

R03 ==> $00000000 - fork was successful

$FFFFFFFF - processor is not idle

$FFFFFFFE - invalid instruction pointer

$FFFFFFFD - invalid processor number