User`s manual

TA - Terminal Attach
3-220
3
TA - Terminal Attach
Command Input
TA [PORT]
Description
The TA command assigns a serial port to be the console. The port
specified must already be assigned (
refer to PF - Port Format NOPF
- Port Detach on page 3-178).
No prompt appears unless the selected port is already the console.
All keyboard exchanges and displays are now made through port.
This remains in effect until either another TA command is issued or
the reset switch is depressed.
If no port is specified, TA restores the console to port selected at
power-up. The prompt will appear at the connected terminal (port
0).
Examples
Example 1: Select port 1 (logical unit #01) as console.
PPC1-Bug>TA 1 <Return>
Console = [01: PPC1- “HOST”]
Example 2: Restore console to port selected at power-up.
PPC1-Bug>TA <Return>
Console = [00: PPC1- "DEBUG"]
PPC1-Bug>