User`s manual

PF - Port Format NOPF - Port Detach
3-181
3
PPC1-Bug>PF 1 <Return>
Baud rate [110,300,600,1200,2400,4800,9600,19200] = 9600? <Return>
Even, Odd, or No Parity [E,O,N] = N? <Return>
Character width [5,6,7,8] = 8? <Return>
Stop Bits [1,2] = 1? 2 <Return>
Auto Xmit enable on CTS* [Y,N] = N? . <Return>
OK to proceed (y/n)? Y <Return>
PPC1-Bug>
Assigning a New Port
These are the configurable parameters (these may vary depending
on the driver):
Name of board?
The device driver. Press the Return key to see a list the currently
supported PowerPC drivers and ports. The controllers are:
Name of port?
The name of the port. The available boards are:
Port base address = $00000000?
The base address of the port
XON = $11=^Q?
XOFF = $13=^S?
Flow control (software handshake) characters (case sensitive).
ASCII control characters or hexadecimal values are accepted.
VKIO VGA Keyboard I/O
PC16550 Asynchronous Communications
Z85C230 Serial Communications
PC87303 Parallel Printer
DEBUG Serial Port 1
HOST Serial Port 2
CPP Parallel Printer Port