User`s manual

PF - Port Format NOPF - Port Detach
3-178
3
PF - Port Format
NOPF - Port Detach
Command Input
PF [PORT]
NOPF [PORT]
Description
The PF command allows you to examine and change the serial
input/output environment. PF may be used to configure a port that
is already assigned or assign and configure a new port. PF supports
PowerPC board drivers and the ports on each.
PORT is the port to be assigned or configured. Without PORT
specified, PF displays a list of the current port assignments.
The NOPF command removes a port assignment. Serial ports
ÒDEBUGÓ (LUN 0), ÒHOSTÓ (LUN 1), and ÒConsoleÓ (LUN
dependent, ÒDEBUGÓ LUN by default) are removable.
To assign or configure a port, invoke the command with the port
number (PORT). Assigning and configuring may be accomplished
consecutively. You are prompted to configure the port parameters.
You may change the displayed value by typing a new value,
followed by the Return key. To leave the field unaltered, press the
Return key without typing a new value.