User`s manual

NIOT - Network I/O Teach (Configuration)

3-158

Node Control Memory Address=FFE10000?

The starting address of the necessary memory needed for the

transmit and receive buffers. 256KB are needed for the Ethernet

driver (transmit/receive buffers).

As of version 1.8 of PPC1Bug, the node control memory address

is dynamically calculated. The saved version(i.e., NVRAM) is

now ignored.

Client IP Address =255.255.255.255?

The IP address of the client. The firmware is considered the

client.

Server IP Address =255.255.255.255?

The IP address of the server. The server is the host system from

which the specified file is retrieved.

Subnet IP Address Mask =255.255.255.0?

The subnet IP address mask. This mask is used to determine if

the server and client are resident on the same network. If they

are not, the gateway IP address is used as the intermediate

target (server).

Broadcast IP Address =255.255.255.255?

The broadcast IP address that the firmware utilizes when a IP

broadcast needs to be performed.

Gateway IP Address =255.255.255.255?

The gateway IP address. The gateway IP address would be

necessary if the server and the client do not reside on the same

network. The gateway IP address would be used as the

intermediate target (server).