User`s manual

NIOP - Network I/O Physical
3-154
3
Controller LUN =00?
The Logical Unit Number (LUN) of the controller to access
Device LUN =00?
The LUN of the device to access
Get/Put =G?
File Name =?
The name of the Þle to load/store. On a write the Þle must exist
on the host system and also be writable (write permission). The
Þlename string must be null terminated. The maximum length
of the string is 64 bytes inclusive of the null terminator.
Note The path of the file name to load/store must point to a
tftp boot area on the host system. See your host system
administrator for details on configuring a tftp boot
area.
Memory Address =00004000?
Address of buffer in memory. On a read, data is read to (received to)
starting at this address. On a write, data is written (sent) starting at
this address.
Length =00000001?
The number of bytes from the data transfer address to transfer.
A length of 0 speciÞes to transfer the entire Þle on a read. On a
write the length must be set to the number of bytes to transfer.
Byte Offset =00000001?
The offset into the Þle on a read. This permits users to wind into
a Þle.
G
Read/get from host
P Write/put to host