User`s manual

NIOC - Network I/O Control
3-149
3
PPC1-Bug>MD E000:&21 <Return>
0000E000 FFFF FFFF FFFF 0800 3E21 0FCC 0806 0001 ........>!......
0000E010 0800 0604 0001 0800 3E21 0FCC ffff 0B2C ........>!.....,
0000E020 FFFF FFFF FFFF 8610 1112 ..........
PPC1-Bug>
PPC1-Bug>NIOC <Return>
Controller LUN =00? <Return>
Device LUN =00? <Return>
Packet Address =00006454? <Return>
00006454 0000 0000 0000 0002 0000 E000 0000 002A ................
00006464 0000 0000 ....
Send Packet (Y/N) =N? Y <Return>
PPC1-Bug>
Example 4:
This example illustrates the reception of data (type 3). The driver
does not block (waits for incoming data). The control/status word
field signifies whether or not data has been received. Currently
only one status bit is specified, bit 16, the receipt of data. This bit is
cleared if no data is present. It is set if receive data is present. The
transfer byte count is also set to the number of bytes associated with
this receive data packet. This field is only valid when bit 16 is set.
PPC1-Bug>NIOC <Return>
Controller LUN =00? <Return>
Device LUN =00? <Return>
Packet Address =00006454? <Return>
00006454 0000 0000 0000 0003 0000 E000 0000 0000 ................
00006464 0000 0000 ....
Send Packet (Y/N) =N? Y <Return>
PPC1-Bug>
View the address data retrieval.
PPC1-Bug>NIOC <Return>
Controller LUN =00? <Return>
Device LUN =00? <Return>
Packet Address =00006454? <Return>
00006454 0000 0000 0000 0003 0000 E000 0000 0222 ................
00006464 0001 0000 ....
Send Packet (Y/N) =N? N <Return>
PPC1-Bug>