User`s manual

NAB - Network Auto Boot
3-138
3
NAB - Network Auto Boot
Command Input
NAB
Description
The NAB command re-invokes the network auto boot feature. This
command simply invokes the NBO command with the specified
parameters saved in NVRAM for the specified network interface.
This invocation occurs at system start-up and can be specified at
either power-up or at any reset condition.
Refer to NBO - Network Boot Operating System on page 3-142.
The clock must be running in order for this command to work
properly. Use TIME ;L to see if the clock is running. Use the SET
command to start and initialize the clock.