User`s manual

MENU - System Menu

3-128

MENU - System Menu

Command Input

Description

The MENU command displays the System Menu, which is shown

below:

1 Continue System Start Up

2 Select Alternate Boot Device

3 Go to System Debugger

4 Initiate Service Call

5 Display System Test Errors

6 Dump Memory to Tape

Enter Menu #:

You can return to the debugger by entering 3 at the Enter Menu

# prompt. (If you execute the Menu command from the PPC1-

Diag> prompt, menu option

3 will return you to the PPCBug

diagnostics.)

Refer to Appendix B for information on using the System Menu.