User`s manual

IRD, IRM, IRS - Idle MPU Register Display/Modify/Set

3-107

IRD, IRM, IRS - Idle MPU Register Display/Modify/Set

Note These commands are for multi-processor boards only.

Command Inputs

IRD MPU# ARGS

IRM MPU# ARGS

IRS MPU# ARGS

Descriptions

The IRD command allows you to display the idle processor's

registers. The idle processor is specified by the argument MPU#.

This argument depends on your configuration. The ARGS

argument is equivalent to the argument string as required by the

command RD. Refer to the RD command for argument syntax.

The IRM command allows you to examine/modify the idle

processor's registers. The idle processor is specified by the

argument MPU#. This argument depends on your configuration.

The ARGS argument is equivalent to the argument string as

required by the command RM. Refer to the RM command for

argument syntax.

The IRS command allows you to display/set a particular register of

the idle processor's register set. The idle processor is specified by

the argument MPU#. This argument depends on your

configuration. The ARGS argument is equivalent to the argument

string as required by the command RS. Refer to the RS command

for argument syntax.

Refer to the individual commands (RD, RM, and RS) for examples.