Specifications

xiv Symbol MiniScan MSXX04 Series Integration Guide
• Chapter 7, Symbol MS3204 Specifications, provides the technical and scanning specifications for the Symbol
MS3204 scanner.
• Chapter 8, Symbol MS954 Specifications, provides the technical and scanning specifications for the Symbol
MS954 scanner.
• Chapter 9, Maintenance and Troubleshooting, provides information on maintaining and troubleshooting the
MiniScan scanners.
• Chapter 10, Parameter Menus describes the programmable parameters, provides bar codes for
programming, and hexadecimal equivalents for host download programming.
• Chapter 11, Simple Serial Interface (SSI) describes scanner-specific updates to the Simple Serial Interface
(SSI) Programmer’s Guide.
• Chapter 12, Mounting Templates, provides mounting templates for the MiniScan scanners.
• Appendix A, ASCII Character Sets, provides prefix and suffix values that can be assigned for ASCII character
data transmission.
Notational Conventions
The following conventions are used in this document:
• Italics are used to highlight chapters and sections in this and related documents.
• bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential
• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possiblity of data or material damage may
occur.
WARNING! This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.