User Guide

3-6
Software Driver Installation
3
When complete, the following dialog comes to view, showing
the software driver for the PCI and PMC Adapters has been
installed to the Windows NT operating system.
9. Click Close to exit from the installation routines.
The driver does not take effect until the computer is restarted.
The following dialog comes to view to remind you of this
necessary action.
10. When ready to proceed, click the OK button and restart your
computer.
The installation of the software driver is now compete.
Refer to the NT Disk Administrator for proper formatting and
partitioning of your SCSI disks.
Figure 3-8. Installed Adapter Listing
Figure 3-9. Restart Message