Technical data

3-42 Computer Group Literature Center Web Site

Installing the CPX2000 Series System and Field Replaceable Units

15. Unplug the five connectors from the backplane (CPX2208 only).

16. Facing the front of the chassis, remove the two screws securing the

power supply to the right side of the chassis. Use a number 1,

Phillips head screwdriver (right angle). Refer to the figure on page

3-40. (CPX2108 only).

17. Facing the rear of the chassis, remove the six screws securing the

rear panel covering the backplane (CPX2108 only).

18. Disconnect the power supply wire bundles from their backplane

connectors (CPX2108 only).

2301 9807

Bottom Plate

Mounting Holes

Power Supply Cables

and Connectors

Backplane

CPX2208 bottom view