Technical data

Removing and Installing the 3.5 Inch Floppy Drive, CD-ROM Drive or Hard Disk Drive
http://www.motorola.com/computer/literature 3-27
3
4. At the front of the chassis, remove the two 6-32 screws fastening the
floppy drive, CD-ROM drive or hard disk drive to the chassis.
5. At the rear of the chassis, remove the four screws securing the rear
drive bay panel and set the panel aside.
2135 9804 (2-2) (i)
Fastening
Screws
Fastening
Screws