Technical data

3-22 Computer Group Literature Center Web Site
Installing the CPX2000 Series System and Field Replaceable Units
3
Removing and Installing the Cooling Fans
This section tells you how to remove and replace the two cooling fans in
the hot swap fan tray located beneath the module cage. You can remove
the fan tray without turning off system power.
Tools You Need
You need a slotted head screwdriver to remove or install the fan tray.
Removing and Installing the Fan Tray
To remove the fan tray:
1. Loosen the two captive screws securing the fan tray vent to the
chassis. Refer to the figure on page 3-23.