Technical data

3-10 Computer Group Literature Center Web Site
Installing the CPX2000 Series System and Field Replaceable Units
3
Installation Troubleshooting
Refer to Table 3-2 to solve some basic problems that may occur after
installing the chassis.
Cleaning and Preventive Maintenance
Motorola computer systems require minimal maintenance and care to keep
them operating properly. Once the installation is complete the most
important part of system maintenance is to regularly clean filters and
removable-media devices. Regular cleaning is a customer responsibility.
BIOS Error Reporting
The CPV5000 and CPV5300 CPUs run a standard BIOS which report
errors by a series of beep sounds or when an error message is displayed to
the screen. Refer to Table 3-3 for AMIBIOS error reporting information.
Table 3-2. Guide for Troubleshooting CPX2000 Series Chassis
Installation
If: Then:
Disk drives do not respond Ensure that power and data
cables are firmly and properly
connected.
Green “power-on” LEDs fail to
light
Check the AC power cable and
check the AC fuse.
Table 3-3. AMIBIOS Error Reporting
If: Then:
The error occurs before the
display device initializes.
A series of beeps sound. Beep codes indicate that a
fatal error has occurred. Refer to Table 3-4
for information about the beep codes.
The error occurs after the display
device initializes.
The error message is displayed. A prompt to press
<F1> can also appear with displayed error
messages.