Technical data

Preparing the Site for Installation

http://www.motorola.com/computer/literature 2-7

❏ Use the shortest possible cable between the single-board computer

and peripherals.

❏ To ensure maximum protection for equipment and operators, check

the protective grounds at each power outlet to make sure they are

adequate.

❏ Protect external interconnecting cables from physical damage

without endangering users. Install the cables under a raised floor if

possible. Avoid tight pulls against sharp corners.

Caution

To avoid the possibility of damage to equipment or

components during cabling, unplug all other devices in the

system before you begin with the installation of any additional

units.