Technical data

5-6
Site Preparation and Installation
5
Installation Options
A system can be either rack-mounted or set up in a floor-standing
pedestal configuration (dual 9-, 12-, and 20-slot, Original Chassis
style only). The pedestal configuration requires base and crown
components as well as bezels and side panels. The chassis
components interconnect vertically with a latching mechanism.
Pedestal Installation
The pedestal configuration requires base and cap components as
well as bezels and side panels. It is available for the Dual 9-, 12-, and
20-slot Original Chassis only.
Figure 5-1 on page 5-7 shows a representative front view of the
system in a pedestal configuration that includes a SCSI Device
Storage Module.