Manualshelf

Technical data

ManualsBrandsMotorola ManualsOtherMPMC101
71727374757677787980
SCSI Device Storage Module Procedures
4-19
4
5. Slide the module out.
Figure 4-6. Power Supply Removal
Replacement
1. Slide the power supply module carefully into the chassis. Use
firm steady pressure to seat the connector properly.
2. Tighten the captive screw that holds the module in the
chassis.
3. Reinstall the module’s bezel, if the installation includes one.
4. Reconnect the module to the AC or DC power source:
– If the power supply is an AC unit, plug the power cord
back into the module and the AC outlet.
– If the power supply is a DC unit, plug the DC connector
into the power supply input and turn the –48Vdc power
source back on.
11276.00 9503 (1-2)