Technical data

SCSI Device Storage Module Procedures
4-15
4
2. Using the guide pins on the bottom of the peripheral
expansion chassis for alignment, lower the expansion chassis
onto the VME card cage.
3. Reinstall the four screws removed in step 6, above, at the
inside corners of the expansion chassis.
4. Reinstall the top cover on the expansion chassis with the five
screws provided.
5. Install the chassis in accordance with the system
configuration:
– If the chassis was in a pedestal configuration, reinstall the
pedestal cover, side panel brackets, and side panels on the
reassembled stack.
– If the chassis was in a rack/mast configuration, return it to
its mounting location.
6. Reinstall the front bezel on the expansion chassis.
7. Reconnect the SCSI cable to the back of the card cage and the
storage chassis.
8. Reconnect the system to the AC or DC power source.