Technical data

Chassis Use
2-17
2
Side Panel Removal
The suggested procedure for removing pedestal side panel
assemblies is as follows:
1. Remove the front bezel.
2. Unlock the side panel assembly by squeezing the inner latch
levers at the forward edge with one hand and simultaneously
slide the assembly backward approximately an inch until it
clears the slide hooks on the chassis.
!
Caution
Hand clearance in the latch area is limited. Work
carefully to avoid injury to fingers.
3. Lift the assembly off the chassis.
4. Repeat steps 2 and 3 at the opposite side of the chassis.