Technical data

Chassis Use
2-15
2
Side Panel/Pedestal Cover Removal and Replacement
The pedestal configuration incorporates side panels for the various
system enclosures (card cage, power supplies, SCSI device storage
module, OEM equipment enclosure) and a pedestal cover. The
inner surfaces of the panels and cover are molded with slots that
engage slide hooks mounted on the enclosure. The side panels are
fitted with latching mechanisms.
The side panels may be ganged together by means of inner stacking
brackets. If so, each set of panels is installed as a unit.
Note The pedestal configuration is available for the Dual 9-,
12-, and 20-slot Original Chassis configuration only. It
is not available for the 3-slot configuration or for the
Extended Chassis.
!
Caution
To maintain electromagnetic compatibility compliance,
the front bezel must be firmly in place and locked.