Technical data

2-14
Original XR Chassis
2
Figure 2-6. Removing the Front Bezel (3-Slot System)
Front Bezel Replacement
1. (For 9U bezels): Position the ball stud catches at the lower
corners of the bezel over the ball studs on the enclosure and
press firmly until the catches are fully engaged.
2. Press the sides of the bezel against the enclosure until the
latches at the sides snap into place.
3. Lock the bezel latches by rotating the locks a quarter-turn
outward from the “unlocked” icon to the “locked” icon with
a Phillips screwdriver.
FRONT BEZEL
11304.00 9601(2-2)