Manualshelf

Technical data

ManualsBrandsMotorola ManualsOtherMPMC101
161162163164165166167168169170
3-Slot Chassis
9-3
9
3
1
/2-Inch Drive Module
The backplane of the system accommodates up to two 3
1
/2-inch
half-height storage devices in the drive bays located above the
VMEmodule installation area.
Removal
1. Switch the power supply of the system to the position
(Standby) and disconnect the system from the AC or DC
power source:
– If the power supply is an AC unit, unplug the power cord
from the AC outlet.
– If the power supply is a DC unit, turn off the –24/–48Vdc
power source and unplug the DC connector from the
power supply input.
2. Remove the front bezel.
3. While pressing the latch at the side of the drive carrier, move
the module back and forth slightly to loosen the backplane
connection. Then carefully remove the module from the
chassis by pulling straight out.
11383.00 9511