Technical data

3-Slot Power Supply
7-3
7
Replacement
1. Slide the power supply module carefully into the chassis. Use
firm steady pressure to seat the connector properly.
2. Tighten the captive screw that holds the module in the
chassis.
3. Reinstall the front bezel.
4. Reconnect the system to the AC or DC power source:
– If the power supply is an AC unit, plug the power cord
back into the AC outlet.
– If the power supply is a DC unit, plug the DC connector
into the power supply input and turn the –24/–48Vdc
power source back on.
11315.00 9505