Technical data

Cabling
5-29
5
Figure 5-9. Dual 9-Slot Chassis Control Cables (with Alarm Board)
Power Cables (AC Chassis)
Use the following instructions to install the power cables.
1. Plug the female end of the system’s power cord into the AC
power connector located on the lower back panel.
2. Plug the end of the console terminal’s power cord into the
connector on the back of the terminal.
3. Attach power cords to all other associated equipment.
2076 9707
S
Y
S
T
E
M
A
S
Y
S
T
E
M
B