Network Device User's Manual

MOTOROLA Errata to MPC750 UserÕs Manual 3
5.1.7, 5-18 Table 5-4, delete the second row in table ( lwarx or stwcx. with W = 1).
7.2.5.2.1, 7-14 For ARTRY, change ÒTiming Comments,Ó ÒNegation,Ó Þrst paragraph,
last sentence to the following:
First the buffer goes to high impedance for a minimum of one-half
processor cycle (dependent on the clock mode), then it is driven
negated for one-half bus cycle before returning to high impedance.
9.1.2, 9-5 In Table 9-1, replace the description of L2CR[L2DO] (bit 9), with the
following:
11.2.1.5, 11-7 Replace Table 11-6 with the following:
9 L2DO L2 data-only. Setting this bit inhibits the caching of instructions in the L2
cache. All accesses from the L1 instruction cache are treated as
cache-inhibited by the L2 cache (bypass L2 cache, no L2 tag look-up
performed).
Table 11-16. PMC2 EventsÑMMCR0[26Ð31] Select Encodings
Encoding Description
00 0000 Register holds current value.
00 0001 Counts processor cycles.
00 0010 Counts completed instructions. Does not include folded branches.
00 0011 Counts transitions from 0 to 1 of TBL bits speciÞed through
MMRC0[RTCSELECT]. 00 = 47, 01 = 51, 10 = 55, 11 = 63.
00 0100 Counts instructions dispatched. 0, 1, or 2 instructions per cycle.
00 0101 Counts L1 instruction cache misses.
00 0110 Counts ITLB misses.
00 0111 Counts L2 instruction misses.
00 1000 Counts branches predicted or resolved not taken.
00 1001 Counts MSR[PR] bit toggles.
00 1010 Counts times reserved load operations completed.
00 1011 Counts completed load and store instructions.
00 1100 Counts snoops to the L1 and the L2.
00 1101 Counts L1 cast-outs to the L2.
00 1110 Counts completed system unit instructions.
00 1111 Counts instruction fetch misses in the L1.
01 0000 Counts branches allowing out-of-order execution that resolved correctly.
All others Reserved.