User`s manual

1-6 MPC564EVB Users Manual
System Memory
Since the MPC564 chip selects are fully programmable, the memory banks can be located at any
location in the MPC5xx memory space.
Following is the default memory map for this board as configured by the Debug Monitor located
in the external flash bank. The internal memory space of the MPC564 is detailed further in the
MPC561/3 Users Manual. Chip Selects 0-3 can be changed by user software to map the external
memory in different locations but the chip select configuration such as wait states and transfer
acknowledge for each memory type should be maintained.
Possible Chip Select usage:
Synchronous SRAM Memory Bank CS0 or CS1 default CS1, MAP SW. 1,2
Synchronous FLASH Memory Bank CS0 or CS2 default CS0, MAP SW. 3,4
10/100T / LCD Port CS3 default CS3, MAP SW. 6,7
MPC564 Internal Flash N/A MAP_SW. 8, may effect mem-
ory map of chip selects
The MPC564EVB Default Memory Map shows the MPC564EVB memory map.
1.2.5.1 Memory Device / Bank Selection and Configuration.
The MPC564EVB board has two internal memory banks, two external memory banks and a
Peripheral memory bank that provide:
Table 1-1. The MPC564EVB Default Memory Map
Address Range Signal and Device
0x0000_0000 - 0x0007_FFFF 512KByte UC3F Flash
0x0008_0000 - 0x002F_7FFF Reserved for Flash
0x002F_8000 - 0x002F_87FF BBC DECRAM 2 KBytes
0x002F_8800 - 0x002F_9FFF Reserved for BBC
0x002F_A000 - 0x002F_BFFF BBC Control
0x002F_C000 - 0x002F_FFFF USIU & Flash Control
0x0030_0000 - 0x0030_7FFF UIMB I/F & IMB Modules 32KBytes
0x0030_8000 - 0x0037_FFFF Reserved for IMB
0x0038_0000 - 0x0038_007F CALRAM/READI Control
0x0038_0080 - 0x0038_3FFF Reserved (L-bus Control)
0x0038_4000 - 0x003F_7FFF Reserved (L-bus Memory)
0x003F_8000 - 0x003F_FFFF CALRAM (internal SRAM)
0x0080_0000 - 0x00A0_0000 External Flash 2MByte (0x0090_0000 -
0x00A0_0000 reserved for dBUG)
0x0100_0000 - 0x0108_0000 Ethernet
0xFFF0_0000 - 0xFFF8_0000 External SRAM 512KByte
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...