User`s manual

HARDWARE PREPARATION AND INSTALLATION
MPC505EVBUM/D 2-17
2.3.2 Background Mode Connector (P5)
Use connector P5 (pinouts shown below) to communicate with the EVB via the background
debug mode (BDM). You may use the serial development interface (SDI) as your BDM interface.
Connect one end of the SDI to your host computer and the other to connector P5. For more
information about the SDI refer to the M68SDIUM Users Manual, M68SDIUM/D.
P5
VFLS0 1 ••2 SRESET~
GND 3 ••4 DSCK
GND 5 ••6 VFLS1
RESET~ 7 ••8 DSDI
VCC/V3.3 9 ••10 DSDO