Specifications

Motorola reserves the right to make changes without further notice to any products herein to
improve reliability, function, or design. Motorola does not assume any liability arising out of the
application or use of any product or circuit described herein; neither does it convey any license
under its patent rights nor the rights of others. Motorola products are not designed, intended, or
authorized for use as components in systems intended for surgical implant into the body, or other
application in which the failure of the Motorola product could create a situation where personal
injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its
officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs,
damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any
claim of personal injury or death associated with such unintended or unauthorized use, even if
such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and the Motorola logo are registered trademarks of Motorola Inc.
Motorola Inc. is an Equal Opportunity/Affirmative Action Employer.
PowerPC is a trademark of International Business Machines Corporation.
CONTENTS
MPC505EVB/D iii
CONTENTS
CHAPTER 1 GENERAL INFORMATION
1.1 INTRODUCTION.............................................................................................................1-1
1.2 FEATURES.......................................................................................................................1-1
1.3 GENERAL DESCRIPTION.............................................................................................1-2
1.4 SPECIFICATIONS...........................................................................................................1-3
1.5 EQUIPMENT REQUIRED...............................................................................................1-4
CHAPTER 2 HARDWARE PREPARATION AND INSTALLATION
2.1 INTRODUCTION.............................................................................................................2-1
2.2 HARDWARE PREPARATION.......................................................................................2-1
2.2.1 Crystal Clock Select Header (J1).............................................................................2-5
2.2.2 Clock Source Select Header (J2)..............................................................................2-6
2.2.3 Keep Alive Power 2 Select Header (J3)...................................................................2-6
2.2.4 Keep Alive Power 2 Select Header (J4)...................................................................2-7
2.2.5 Burst Memory Select Header (J5)............................................................................2-7
2.2.6 System Clock Selection Headers (J6 and J7)...........................................................2-8
2.2.7 EVB LED Descriptions............................................................................................2-9
2.2.8 Optional Memory Configuration..............................................................................2-9
2.2.9 EVB Reset Switches...............................................................................................2-10
2.2.10EVB DIP Switches.................................................................................................2-10
2.2.10.1Chip Select Dip Switch (DS1).......................................................................2-11
2.3.10.2Reset Data Dip Switches (DS2 – DS5).........................................................2-12
2.2.10.3DTE/DCE Settings........................................................................................2-15
2.3 INSTALLATION INSTRUCTIONS..............................................................................2-16
2.3.1 Host Computer – EVB Interconnection.................................................................2-16
2.3.2 Background Mode Connector (P5).........................................................................2-17
2.3.3 Power Supply – EVB Interconnection....................................................................2-18
2.3.4 RS-232C – EVB Interconnection...........................................................................2-19
2.3.5 EVB Expansion Connectors...................................................................................2-20
2.3.6 Logic Analyzer Connectors....................................................................................2-22
2.3.7 SCSI........................................................................................................................2-23
Fr
eescale S
emiconduct
or
, I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...