User Guide

Attaching the Antenna

Turn off the radio.

Set the antenna in the receptacle and turn clockwise.

Powering On/Off the Radio

Rotate the On/Off/Volume Control Knob clockwise or

counterclockwise until a click sounds.

Adjusting the Volume

Rotate the On/Off/Volume Control Knob clockwise or

counterclockwise.

LED Indicators

Blinking Red

Radio is transmitting at low battery condition, has failed the self-test

upon powering up, has moved out of range if radio is configured with

Auto-Range Transponder System, or is receiving an emergency

transmission.

Solid Green

Radio is powering up, is transmitting, indicating full charge of the bat-

tery when the programmed Battery Strength button is pressed, or

when the Battery Type button is pressed to select NiMH as the bat-

tery type.

Blinking Green

Radio is receiving a call or data, or is detecting activity over the air.

Solid Yellow

Radio is monitoring a conventional channel, indicates when the Bat-

tery Type button is pressed to set the battery type as Li-Ion, or indi-

cates fair battery charge when programmable button is pressed.

Blinking Yellow

Radio is scanning for activity, has Flexible Receive List enabled, or

has yet to respond to a Call Alert.

Double Blinking Yellow

Radio is actively searching for a new site, is locked, or has yet to re-

spond to a Group Call Alert.

English