User guide

1 Turn on your Bluetooth-enabled device and place

it in pairing mode. Refer to respective Bluetooth-

enabled device’s user manual.

2 On your radio, press the programmed Bluetooth

Connect button.

A tone sounds and LED blinks yellow.

3 Your Bluetooth-enabled device may require

additional steps to complete the pairing. Refer to

respective Bluetooth-enabled device’s user

manual.

If successful, a positive indicator tone sounds.

If unsuccessful, a negative indicator tone sounds.

Note: A pin code may be required to be programmed

in your radio before it can pair with some devices.

Contact your dealer for more information.

Disconnecting from a Bluetooth Device

On your radio, press the programmed Bluetooth

Disconnect button.

A positive indicator tone sounds when disconnected.

Switching Audio Route between Internal Radio Speaker

and Bluetooth Device

You can toggle audio routing between internal radio

speaker and external Bluetooth-enabled accessory.

Press the programmed Bluetooth Audio Switch

button.

A tone sounds when the audio route has switched.

Utilities

Turning the Radio Tones/Alerts On or Off

You can enable and disable all radio tones and alerts

(except for the incoming Emergency alert tone) if

needed.

Press the programmed All Tones/Alerts button.

Tone heard ... Indication

Positive Indicator tone All tones and alerts are

ON.

Negative Indicator tone All tones and alerts are

OFF.

Advanced Features in Connect Plus Mode

English