User guide

Making a Privacy-Enabled (Scrambled) Call

Toggle privacy on using the programmed privacy

button. Your radio must have the Privacy feature

enabled for the currently selected channel position to

send a privacy-enabled transmission. When privacy is

enabled for the currently selected channel position, all

voice transmissions made by your radio will be

scrambled. This includes Group Call, Multigroup Call,

talk-back during scanned calls, Site All Call,

Emergency Call, and Private Call. Only receiving

radios with the same Key Value and Key ID as your

radio will be able to unscramble the transmission.

Password Lock Features

If enabled, this feature only allows you access your

radio if the correct password is entered upon

powering up.

Accessing the Radio from Password

1 Power up the radio.

The radio sounds a continuous tone.

2 Enter your current four-digit password by rotating

the Volume/Channel Knob to dial the number.

Press and hold the Volume/Channel Knob to move

to the next digit. Enter the remaining digits of the

password in the same manner.

If the password is correct, the radio proceeds to

power up. See Powering Up the Radio on page

13.

If the password is incorrect, the radio sounds a

continuous tone. Repeat Step 2.

After the third incorrect password, A tone sounds

and the LED double blinks yellow. The radio

enters into locked state.

Note: The radio is unable to receive any call in

locked state. The use of Emergency footswitch

cancels password input to access the radio.

Unlocking the Radio from Locked State

1 If your radio was powered down after being in the

locked state, power up the radio.

A tone sounds and the LED double blinks yellow.

2 Wait for 15 minutes.

Your radio restarts the 15 minutes timer for locked

state when you power up.

Advanced Features in Connect Plus Mode

English