User guide

Receiving and Responding to a Call Alert

When you receive a Call Alert page, you hear a

repetitive tone and the LED blinks yellow.

Press the PTT button within four (4) seconds of

receiving a Call Alert page to respond to the

Private Call.

Making a Call Alert with the One Touch Access Button

Press the programmed One Touch Access

button to make a Call Alert to the predefined alias.

The LED lights up solid green when your radio is

sending the Call Alert.

If the Call Alert acknowledgement is received, a

positive indicator tone sounds.

If the Call Alert acknowledgement is not received,

a negative indicator tone sounds.

Emergency Operation

Note: If your radio is programmed for “Silent” or

“Silent with voice” emergency initiation, in most cases

it automatically exits silent operation after the

Emergency Call or Emergency Alert is finished. The

exception to this rule is when “Emergency Alert” is the

configured Emergency Mode and “Silent” is the

configured Emergency Type. If your radio is

programmed in this manner, the silent operation

continues until you cancel silent operation by

pressing PTT or the button configured for

“Emergency Off”.

Emergency voice calls and Emergency Alerts are not

supported when operating in Connect Plus Auto

Fallback mode. For more information see the Auto

Fallback on page 65.

An Emergency Alert is used to indicate a critical

situation. You can initiate an Emergency at any time,

in any state, even when there is activity on the current

channel. Pressing the Emergency button initiates the

programmed Emergency mode. The programmed

Emergency mode may also be initiated by triggering

the optional Man Down feature. The Emergency

feature may be disabled in your radio.

Your dealer can set the duration of a button press for

the programmed Emergency button, except for long

press, which is similar with all other buttons:

Short press Between 0.05 seconds and 0.75

seconds.

Advanced Features in Connect Plus Mode

English