User guide

radio can have multiple One Touch Access

buttons programmed.

Note: Your radio must have the Privacy feature

enabled on the channel to send a privacy-enabled

transmission. Only target radios with the same Key

Value and Key ID as your radio will be able to

unscramble the transmission.

Note: See Privacy on page 73 for more information.

Making a Call

Making a Group Call

To make a call to a group of users, your radio must

be configured as part of that group.

1 Select the channel with the active group alias or

ID. See Selecting a Call Type on page 59.

2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)

from your mouth.

3 Press the PTT button to make the call.

The LED lights up solid green.

4 Wait for the Talk Permit Tone to finish (if enabled),

and speak clearly into the microphone.

5 Release the PTT button to listen.

When the target radio responds, the LED blinks

green.

If there is no voice activity for a predetermined

period of time, the call ends.

Making a Private Call

While you can receive and/or respond to a Private

Call initiated by an authorized individual radio, your

radio must be programmed for you to initiate a Private

Call.

You will hear a negative indicator tone, when you

make a Private Call via the One Touch Access

button, or the Channel Selector Knob, if this feature is

not enabled.

1 Do one of the following.

• Select the channel with the active subscriber

alias or ID. See Selecting a Call Type on page

59.

Making and Receiving Calls in Connect Plus Mode

English