User guide

Your radio unmutes and the incoming call sounds

through the radio speaker.

A Site All Call does not wait for a predetermined

period of time before ending.

You cannot respond to an Site All Call.

Note: The radio stops receiving the Site All Call if you

switch to a different channel while receiving the call.

During a Site All Call, you will not be able to use any

programmed button functions until the call ends.

Receiving an Inbound Private Phone Call

When you receive an Inbound Private Phone Call, the

LED blinks green. The radio unmutes and the

incoming private phone call sounds through the

radio's speaker.

1 Press and hold down PTT button to answer and

talk. Release the PTT button to listen.

2 Press preprogrammed Phone Exit button to end

the call.

A short feedback tone sounds.

Receiving an Inbound Phone Talkgroup Call

When you receive an Inbound Phone Talkgroup Call,

the LED blinks green. The radio unmutes and the

incoming group call sounds through the radio's

speaker.

Press the PTT button to talk and release it to

listen.

Inbound Phone Multi-Group Call

When you receive an Inbound Phone Multi-Group

Call, the LED blinks green. The radio unmutes and

the incoming multi-group call sounds through the

radio's speaker.

Making a Radio Call

After selecting your channel, you can select a

subscriber alias or ID, or group alias or ID by using:

• The Channel Selector Knob.

• A programmed One Touch Access button – The

One Touch Access feature allows you to make a

Private Call to a predefined ID easily. This feature

can be assigned to a short or long programmable

button press. You can ONLY have one ID

assigned to a One Touch Access button. Your

Making and Receiving Calls in Connect Plus Mode

English