User guide

If the password is incorrect, you hear a continuous

tone.

After the third incorrect password, your radio

enters into locked state. A tone sounds and the

LED double blinks yellow.

Your radio enters into locked state for 15 minutes,

and responds to inputs from On/Off Button only.

Note: The radio is unable to receive any call,

including emergency calls, in locked state.

The use of Emergency footswitch cancels out

password input to access radio.

Unlocking the Radio from Locked State

1 If your radio was powered down after being in the

locked state, power up the radio.

A tone sounds and the LED double blinks yellow.

2 Wait for 15 minutes.

Your radio restarts the 15 minutes timer for locked

state when you power up.

3 Repeat Steps 1 and 2 in Accessing the Radio from

Password on page 44.

Bluetooth Operation

Note: If disabled via the CPS, all Bluetooth-related

features are disabled and the Bluetooth device

database is erased.

This feature allows you to use your radio with a

Bluetooth-enabled device (accessory) via a wireless

Bluetooth connection. Your radio supports both

Motorola and COTS (Commercially available Off-The-

Shelf) Bluetooth-enabled devices.

Bluetooth operates within a range of 10 meters (32

feet) line of sight. This is an unobstructed path

between your radio and your Bluetooth-enabled

device.

It is not recommended that you leave your radio

behind and expect your Bluetooth-enabled device to

work with a high degree of reliability when they are

separated.

At the fringe areas of reception, both voice and tone

quality will start to sound “garbled” or “broken”. To

correct this problem, simply position your radio and

Bluetooth-enabled device closer to each other (within

the 10-meter/32 feet defined range) to re-establish

clear audio reception. Your radio’s Bluetooth function

Advanced Features in Non-Connect Plus Mode

English