User guide

Note: Some radio models may not offer this Privacy

feature. Check with your dealer or system

administrator for more information.

Press the programmed Privacy button to toggle

privacy on or off.

Multi-Site Controls

These features are applicable when your current

radio channel is part of an IP Site Connect or Linked

Capacity Plus configuration.

See IP Site Connect on page 22 and Linked Capacity

Plus on page 23 for more details about these

configurations.

Starting an Automatic Site Search

Note: The radio only scans for a new site if the

current signal is weak or when the radio is unable to

detect any signal from the current site. If the RSSI

value is strong, the radio remains on the current site.

Press the programmed Site Lock On/Off button.

If the current channel is a multi-site channel with

an attached roam list and is out of range, the radio

also performs an automatic site search (site is

unlocked) during:

• a PTT button press.

• data transmission.

A tone sounds.

The LED blinks yellow rapidly when the radio is

actively searching for a new site, and turns off

once the radio locks on to a site.

Stopping an Automatic Site Search

When your radio is actively searching for a new

site, the programmed Site Lock On/Off button to

stop automatic site search.

A tone sounds and LED turns off.

Starting a Manual Site Search

A tone sounds and the LED blinks green.

If a new site is found, a positive indicator tone

sounds and the LED turns off.

If there is no available site within range, a negative

indicator tone sounds and the LED turns off.

Advanced Features in Non-Connect Plus Mode

English