User guide

Note: When you receive a Phone Call as an All Call,

you can respond to the call or end the call, only if an

All Call type is assigned to the channel.

1 Press the PTT button to respond to the call.

The LED lights up solid green.

2 Release the PTT button to listen.

If there is no voice activity for a predetermined period

of time, the call ends.

Making a Radio Call

After selecting your channel, you can select a

subscriber alias or ID, or group alias or ID by using:

• The Volume/Channel Selector Knob.

Note: Your radio must have the Privacy feature

enabled on the channel to send a privacy-enabled

transmission. Only target radios with the same

Privacy Key OR the same Key Value and Key ID as

your radio will be able to unscramble the

transmission.

Note: See Privacy on page 42 for more information.

Making a Group Call

To make a call to a group of users, your radio must

be configured as part of that group.

1 Do one of the following.

• Select the channel with the active group alias

or ID. See Selecting a Channel on page 24.

• Press the programmed One Touch Access

button.

2 Hold the microphone 1 to 2 inches (2.5 to 5.0 cm)

from your mouth.

3 Press the PTT button to make the call.

The LED lights up solid green.

4 Release the PTT button to listen.

When the target radio responds, the LED blinks

green.

If the Channel Free Indication feature is

enabled, you hear a short alert tone the moment

the transmitting radio releases the PTT button,

indicating the channel is free for you to respond.

Press the PTT button to respond.

Making and Receiving Calls in Non-Connect Plus Mode

English