User guide

Making and Receiving Calls in Non-

Connect Plus Mode

Selecting a Zone

A zone is a group of channels. Your radio supports up

to 2 zones, with a maximum of 32 channels per zone.

1 Press the programmed Zone button.

2 You hear a tone indicating the Zone change.

Tone Zone Change

Positive Indicator

Tone

Radio has switched from

Zone 1 to Zone 2.

Negative

Indicator Tone

Radio has switched from

Zone 2 to Zone 1.

Selecting a Channel

Transmissions are sent and received on a channel.

Depending on your radio’s configuration, each

channel may have been programmed differently to

support different groups of users or supplied with

different features.

Select a channel by using:

• Volume/Channel Knob.

• The programmed Channel Up or Channel

Down buttons.

• The programmed One Touch Access button.

Receiving and Responding to a Radio Call

Once the channel, subscriber ID, or group ID is set,

you can proceed to receive and respond to calls.

The LED lights up solid green while the radio is

transmitting and blinks green when the radio is

receiving.

Note: The LED lights up solid green while the radio is

transmitting and blinks greenrapidly when the radio is

receiving a privacy-enabled call.

To unscramble a privacy-enabled call, your radio

must have the same Privacy Key, OR the same Key

Value and Key ID (programmed by your dealer), as

the transmitting radio (the radio you are receiving the

call from).

Making and Receiving Calls in Non-Connect Plus Mode

English