User guide

Repetitive Tone A single tone that

repeats itself until it is

terminated by the user.

Momentary Tone Sounds only once for a

short period of time

defined by the radio.

Indicator Tones

High pitched tone Low pitched tone

Positive Indicator Tone

Negative Indicator Tone

Switching Between Conventional Analog and

Digital Mode

Each channel in your radio can be configured as a

conventional analog or conventional digital channel.

To switch between an analog or a digital channel, use

the

•

Volume/Channel Knob ( ).

• Programmed Channel Up or Channel Down

buttons.

P1 P2 P3

When switching from digital to analog mode, certain

features are unavailable.

Your radio also has features available in both analog

and digital mode. However, the minor differences in

the way each feature works does not affect the

performance of your radio.

Note: Your radio also switches between digital and

analog modes during a dual mode scan (see Scan on

page 34).

To use the programmed Channel Up or Channel

Down buttons, press Channel Up or Channel Down

to select the required channel.

Additional Radio Controls in Non-Connect Plus Mode

English