User’s Guide Digital Video Baby Monitor With Wi-Fi® Internet Viewing Models: MBP854CONNECT, MBP854CONNECT-2, MBP854CONNECT-3, MBP854CONNECT-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit RESET 16 15 11 12 13 14 21 2 7 3 8 4 9 17 5 10 6 1 19 18 Display (LCD screen) Video ON/OFF Key V Press to turn ON/OFF the LCD display 3. Talk Key T Press and hold to speak to your baby 4. Up Key + Normal Mode: Tilt Up Menu Mode: Up 5. Down Key Normal Mode: Tilt Down Menu Mode: Down 6. Microphone 7. Menu Key M Press to open the Menu options 8. OK Key O 9. Left Key < Normal Mode: Pan Left Menu Mode: Left 10. Right Key > Normal Mode: Pan Right Menu Mode: Right 1.
Parent Unit menu icons Signal Level (4 Levels) Night Vision Mode (Screen changes to Black/White) Talk Mode Battery Level Control (4 Levels) Pan Left Pan Right Tilt Up Tilt Down Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Song Selections) Alarm Setting (6h, 4h, 2h, Off) Temperature Reading (HH ºC / ºF or LL ºC / ºF) Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF
Overview of Your Baby Unit 1 2 8 3 4 5 9 6 5V 1.5A 7 1. 2. 3. 4. 5. 6. Light Sensor (for night mode detection) Camera Lens Infrared LEDs (for night vision) Power / Status indicator Microphone PAIR Button 10 11 7. Speaker 8. Antenna 9. Micro USB socket 10. ON/OFF Switch 11.
Table of contents 1. 2. Safety Instructions ..................................................................................... 8 Getting Started........................................................................................ 11 2.1 2.2 2.3 3. Using the Baby Monitor........................................................................... 14 3.1 3.2 3.3 3.4 3.5 3.6 4. Baby Unit Power Supply............................................................................
5.5 5.6 5.7 6. 7. 8. 9. User Account and Camera Setup: Working with iPhone®/iPad® .................................................................. 28 5.4.1 Power ON and Connect the Camera ......................................28 5.4.2 Download the Hubble for Motorola Monitors App .................. 28 5.4.3 Run the Hubble App on your iPhone®/iPad® ......................... 29 5.4.4 Add the Camera to your account .............................................
1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
ENGLISH Baby Unit SET UP & USE: ● Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. ● Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. ● NEVER place the Baby Unit or cords within the crib. ● Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
• Do not install the Baby Monitor near a heat source. • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions.
2.1 ENGLISH 2. Getting Started Baby Unit Power Supply Power adapter plug Switch to turn ON the camera ON OFF 1. Connect the small plug of the power adapter to the Baby Unit (camera) and the other end to a suitable electrical outlet. NOTE Only use the enclosed power adapter (5V DC / 1500mA). 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in blue. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
Press and hold the 0 POWER ON/OFF button for 1 second to turn ON the Parent Unit. 3. Once the Baby and Parent Units are switched on, the display on the Parent Unit will show the video captured by the Baby Unit. 4. If there is no connection or you are out of range, the video display will go off and the unit will beep every 5 seconds. Move the Parent Unit closer to the Baby Unit until the link is re-established. 5.
Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. Press the M button of the Parent Unit and the menu bar will pop up. is highlighted, and 2. Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the 3.
3. Using the Baby Monitor 3.1 Setting up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the Baby Unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the Parent Unit.
Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F. Using the Baby Monitor 15 ENGLISH 3.
4. Parent Unit Menu Options 4.1 1. 4.2 1. 2. 3. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4.5 1. 2. 3. 4. 16 Volume Press the Volume button - or + to adjust the volume level, the icon will pop up and you can select the desired volume level from level 0~8. (The default volume level setting is level 4.) Brightness Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > button until Press the + UP button or - DOWN button to select the desired brightness level from level 1 ~ 8.
Camera Control 4.6.1 Add (pair) a camera ENGLISH 4.6 Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the add, and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
4.6.3 Delete a camera Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the del , and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to delete that registration.
Video ENGLISH 4.9 You can record a video of your baby through this function, the videos will be stored in the SD Memory Card, so please make sure the memory card has enough free space to store the recording data. Press the M button and the menu bar will pop up. is highlighted. Press the < LEFT button or > RIGHT button until Press the + UP button or - DOWN button to select , and press O button to start video recording, thence select press and press O button to stop. and press O 4.
5. Wi-Fi Internet Viewing 5.1 Minimum System Requirements Web Portal • Windows® 7 • Mac OS® 10.7 • Chrome™ 24 • Internet Explorer® 9 • Safari® 6 • Java™ 7 • Firefox® 18.0 • Adobe® Flash® Player 15.0 Android™ System • Version 4.2 or above iPhone®/iPad® iOS • Version 7.
Getting started - Connecting Devices ENGLISH 5.2 How does it work? View your Camera from any compatible device remotely When a user tries to access the Camera, our secure server authenticates the user’s identity and permits access to the Camera. Setup Connect the Camera to the power adapter, then plug into an suitable electrical outlet and make sure the power switch is in the ON position. The Camera must be within range of the Wi-Fi® router with which you want to connect.
5.3 User Account and Camera Setup on Android™ Devices What you need • MBP854CONNECT camera • The power adapter for the Camera • Device with Android™ system version 4.2 or above 5.3.1 Power ON and Connect the Camera • Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket on the back of the Camera. • Make sure that the ON/OFF switch is in the ON position. • The Camera’s Red LED flashes after the Camera has finished booting.
ENGLISH Run the Hubble App on Android™ device • Ensure your Android™ device is connected to your Wi-Fi® router. • Run the Hubble App and key in your Hubble App account information, read through the Terms of Service then select “I agree to the Terms of Use” before you tap on Create. (Picture A1) Note: If you have a Hubble App account, please select Already have a Account? to go to the next step. A1 Wi-Fi Internet Viewing 23 Android™ 5.3.
5.3.4 Add Camera to your account • Create a new account and Login. • Tap on Add Camera. (Picture A2) • Tap on Continue. (Picture A3) A2 A3 • The setup instructions will appear on the following screen.
Android™ • The App will automatically search for and connect to your Camera as shown in the pictures below (A5 & A6) and the blue/red color LED on the Camera will flash. ENGLISH • Press and hold the PAIR button for 3 seconds at the side of the Camera, you will then hear a beep tone and a voice saying "Ready for pairing" from the Camera Unit. Tap on Search for Camera.
• Select your Wi-Fi® Network and tap Continue, enter your password then tap on Connect. (Picture A7, A8) A7 A8 • It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (Picture A9, A10). If connection fails, please tap on the Retry button and repeat the steps starting from 5.3.4.
ENGLISH • Tap on Watch Live Camera to view the Camera video, the Camera's Blue LED will flash. (Picture A11) Android™ • Tap on the Hubble logo and go back to the Camera list.
5.4 User Account and Camera Setup: Working with iPhone®/iPad® What you need • MBP854CONNECT camera • The power adapter for the Camera • iPhone® / iPad® with iOS 7.0 version or up 5.4.1 Power ON and Connect the Camera • Connect the power adapter to an electrical outlet and insert the plug into the micro USB socket at the back of the Camera. • Make sure that the ON/OFF switch is in the ON position. • The Camera's red LED flashes after the Camera has finished booting.
• Run the Hubble App and key in your account information, read through the Terms of Service then select “I agree to the Terms of Service” before you tap on Create. (Picture i1) Note: If you have a Hubble App account, please select Already have a Account? to go to the next step. i1 Wi-Fi Internet Viewing 29 ENGLISH Run the Hubble App on your iPhone®/iPad® • Ensure your iPhone®/iPad® is connected to your Wi-Fi® Router. iOS 5.4.
5.4.4 Add the Camera to your account • Create a new account and Login. • Tap on Add Camera. (Picture i2) • Tap on “MBP854CONNECT”. (Picture i3) FOCUS85 / SCOUT66 / MBP854 i2 Blink83 / Scout83 / MBP36HD i3 • Follow the instruction on screen to turn on the Bluetooth™ function of your iPhone/iPad.
iOS ENGLISH • Tap on the Home button, then enter the “Settings” menu to turn on the Bluetooth™ function of your iPhone/iPad. i5 i6 • Press the HOME key to exit the Settings menu and tap on the “Hubble Home” App to enter the start up screen.
• Tap on Continue and follow the instructions below.
iOS ENGLISH • Follow the steps above to locate the Camera with identification number “CameraHD-xxxxxxxxxx”, then tap on Continue, ensure your iPhone® or iPad® connected it. (Picture i8) i8 • Select your Wi-Fi® Network and tap Continue, enter your password and then tap Next.
• It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (Pictures i11, i12). If connection fails, please tap on the Retry button and repeat Step 5.4.4 as instructed above. i11 i12 • Tap on Watch Live Camera to view the Camera video. (Picture i13) • Tap on Hubble logo to go back to Camera list.
Camera Functions: Working with devices for Android™ 5.5.1 Connecting the Camera to Power ENGLISH 5.5 • Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: To switch the device off, slide the ON/OFF switch to OFF.) • Run the Hubble App on your Android™ device. • The Camera view appears on the screen. 5.5.2 Add more cameras • On Camera view, tap on the Hubble logo to go back to the Add Camera page.
5.5.3 Remove a Camera You can remove a Camera from your account by following these steps: • Tap the Settings icon (Picture A15) on the General page, then tap on Camera Detail. • Select Remove Camera and tap on Yes to delete the unit from camera list.
Change your Account Information You can change the account information using your Android™ device. • Tap Account on the General page, the Account Settings appears on screen. (Picture A17) ENGLISH 5.5.4 • Tap on Change Password to change your password following the instructions. Android™ • Tap on Log Out to leave the account. • Tap on Freemium plan, it will go to the link of Cloud Video Recording Service, to obtain more information, please visit our website http://www.hubbleconnected.com.
5.5.5 Camera settings You can change the Camera settings by tapping the Settings icon Camera list screen/page. (Picture A18) on the • Tap on Camera Details to review Camera Name, Change Image, Firmware version, Model ID and Remove Camera. (Picture A19) A18 A19 • Tap on Notification Sensitivity to set the sensitivity of sound & motion detection, and to set an Alert of High/Low temperature.
• Tap on General Settings to shift the format of the Clock (12hr/24hr) & the Temperature (°C / °F) and activate Notification Sound or Vibration. (Picture A21) • Tap on Do Not Disturb, set the timer to the desired time and select ON, the Camera will not send any sound or alert to your Android™ device for the duration of your setting. (Picture A22) A21 Wi-Fi Internet Viewing A22 39 ENGLISH General Settings • Tap Settings on the General page. Android™ 5.5.
5.5.7 Features of the Hubble App Tap on the viewing area and the function icons will appear as shown below. Two Way Communication – Tap on to activate the function. Press the round button once to speak through the Camera. Toggle the button again to listen to the audio feedback from the Camera.
ENGLISH Pan and Tilt Function: Android™ Tap the up and down buttons to tilt, the left and right buttons to pan.
Photo/Video - Take a photo or record a video from your Camera. Tap the Video icon to activate the Video function and press the red button to start and release to stop recording. (Pictures A27, A28) Tap the Camera icon to switch to Camera mode, you can capture photos from the Camera view.
Temperature Measure – The temperature reading from the temperature sensor at the back of the Camera will display on your Android™ device screen (Picture A31). The reading will turn RED if the temperature goes beyond the High/Low Temperature as set in your Account. (see section 4.2.4) A30 Wi-Fi Internet Viewing A31 43 ENGLISH Android™ Note: Photos and videos will be stored on the internal flash memory of your Android™ device, they can be accessed from the Gallery or Media Player.
5.6 Camera Functions: Working with devices for iPhone®/iPad® • Run the Hubble App on your iPhone®/iPad®. • The Camera view appears on the screen. 5.6.1 Add more cameras • In Camera view, tap on the Motorola logo to go to the Add Camera page. (Picture i15) • Tap on Add Camera to add another Camera (follow steps for iPhone®/iPad® setup Section 5.4.4.) (Picture i16) • Once the Camera has been added, the Camera view will be automatically displayed.
Remove a Camera ENGLISH 5.6.2 You can remove a Camera from your Account by following these steps: • Tap the Settings icon (Picture i17) on the General page, then tap on Camera Detail. iOS • Select Remove Camera and tap on Yes to delete the unit from camera list.
5.6.3 Change your Account Information You can change the account information using your iPhone®/iPad®. • Tap Account on the General page and the Account settings will appear on screen. (Picture i19) • Tap on Change Password to change your password by following the instructions. • Tap on Log Out to leave the account. • Tap on Current plan, it will go to the link of Cloud Video Recording Service, to obtain more information, please visit our website https://hubbleconnected.com/plans/.
Camera settings iOS You can change the Camera settings to tap the Settings icon on the General page (Picture i20). You can review the Camera Name and Firmware version (Picture i21) and are allowed to change the Camera name by tapping on the existing name and following the instructions. ENGLISH 5.6.4 i20 i21 i22 • Tap on Notification Sensitivity to set the sensitivity of sound & motion detection, and to set an Alert of High/Low temperature.
5.6.5 General settings • Tap on Settings on the General page. (Picture i23) • Tap on General Settings to change the format for Clock (12hr/24hr) & Temperature (°C / °F) and activate Notification Sound or Vibration. (Picture i24) i23 i24 i25 • Tap on Do Not Disturb, set the timer to the desired time and select ON, the Camera will not send any sound or alert to your iPhone®/iPad® for the duration of your setting.
Hubble App Settings iOS • Tap on Settings on your iPhone®/iPad®, and the applications will appear, tap on the Hubble App and the settings will be shown on screen. (Picture i26) ENGLISH 5.6.
5.6.7 Features of the Hubble App On Camera view, tap the viewing area and Function Icons will appear as follows. Two Way Communication – Tap on to activate the function. Press the round button once to speak through the Camera. Toggle the button again to listen to the audio feedback from the Camera.
ENGLISH Pan and Tilt Function: iOS Tap the up and down buttons to tilt, the left and right buttons to pan.
Take Picture - Tap on Camera icon view. (Picture i31) to capture photos from the Camera i31 Note: Photos will be stored on the internal flash memory of your iPhone®/iPad®.
iOS Temperature Display – The temperature reading from the temperature sensor at the back of the Camera will display on your iPhone®/iPad® screen (Picture i33). The readings will turn RED if the temperature goes beyond the High/Low Temperature as set in your Account. (see section 5.6.5) ENGLISH Melody – To play one of the pre-set 5 melodies, tap on Melody to show the Melody menu and select the one you prefer to play on your Camera.
5.7 Camera Functions: Working with PC/Notebook • Go to https://app.hubbleconnected.com/#login • Enter your User Name and Password and then click Login if you have already created an account. • Click on the Camera list paired in your account via Android™ device or iPhone®/iPad®, and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. • On the website, you can change the Settings by following the Menu instructions.
ENGLISH 6. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
7. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
ENGLISH 8. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the Parent Unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Interference Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 3 to 6ft (1 to 2m) between the 2 units to avoid audio feedback. • lf the Baby Unit is too far away it may be out of range, so move the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
ENGLISH If you forgot your password If you do not remember your password, tap Forgot password and submit your e-mail address. A new password will be sent to your e-mail address immediately. Troubleshooting for Wi-Fi® Internet Viewing Category Problem Description / Error Solution Account I am unable to login Please check your user name and even after registration. password. Account Please ensure that you have I receive an error message saying: "Email registered with us.
1. Connectivity I get a message: We Issues are having problems accessing your camera. This could be due to lack of internet 2. connection. Please wait and try again later. 3. Viewing Camera When I am in "remote mode", the video stops after 5 minutes. How do I view for longer? Please try again in a few minutes. This could be because of any issue with your internet connection. If the problem remains, please restart your Camera to check if this fixes the problem. Please restart your Wireless Router.
What are the supported browsers for accessing from my PC/ Mac®? We recommend using Google Chrome™ 24 or above. However the following browsers are also supported: Internet Explorer® 9.0 or above (for PC), Safari® 6.0 or above (for Mac) or Firefox® 18.0 or above (both PC or Mac). General What is the significance of LED flashing? A flashing LED indicates the following status: Slow flashing: 1. Your Camera is in setup mode. You can add the Camera to your account in this mode.
Setting Up During setup on device for Android™ and iOS, I am not able to find my Camera during the last step and the setup fails. Please reset the Camera to setup mode and try again. Press and hold the PAIR button on the bottom of the Camera until you hear a beep. Wait for a minute for the Camera to restart. When the Camera LED is blinking, this indicates that it is in setup mode. Now restart the setup from your smartphone again.
I do not hear any sound You can tap on the speaker icon in the when I am accessing a video stream screen to hear audio. By default the audio is not ON when you remote Camera. are accessing a remote Camera. General What is the meaning of When you are accessing your Camera from the same wireless network (Home) "Local Camera" and in which it is configured, it is a Local "Remote Camera"? Camera. When you are accessing your Camera away from your home it is a Remote Camera.
Setting up When the video is cut off, the application attempts to reconnect and and results in lost sound and choppy video. You will need to turn off the auto lock function of your smart device to ensure continuous video/audio feeding. Features How many users can access the Camera at one time? If you are accessing in Local Mode, two users are supported, after two users all streaming will go through the remote server. This allows for unlimited user access to a single Camera at one time.
ENGLISH 9. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ENGLISH Technical Specifications Baby Unit Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 1M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter Ten Pao International Ltd. S009GU0500150 Input: 100-240V AC, 50/60Hz, 300mA; Output: 5.0V DC, 1500mA WARNING Use only with supplied power supply.
Parent Unit Frequency 2.4 GHz to 2.48 GHz Display 4.3" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter Ten Pao International Ltd. S009GU0500150 Input: 100-240V AC, 50/60Hz, 300mA; Output: 5.0V DC, 1500mA WARNING Use only with provided power supply. Battery Motorola BF6X 3.7V, 1880mAh Lithium-Ion Polymer, rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
