User`s guide

12 Parent Unit Menu Options
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until is highlighted.
3. Press the
+ UP button or - DOWN button to select the alarm time. (The
default setting is Alarm OFF.)
4.6 Camera Control
4.6.1 Add (pair) a Camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until is highlighted, and
the
del/add/view/scan menu will pop up.
3. Press the
+ UP button or - DOWN button to select add , and press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN
button to select the desired Camera, and press the OK button to start
searching for a Camera Unit.
5. Press and hold the PAIR button on side of the Baby Unit until the Parent Unit
finds the Camera, beeps and the picture from the Camera appears.
NOTE
A camera can only be registered to one Parent Unit at any one time.
4.6.2 View a Camera
1. Press the M button and the menu bar will pop up.
2. Press the
< LEFT button or > RIGHT button until is highlighted and
the
del/add/view/scan menu pops up.
3. Press the
+ UP button or - DOWN button to select view , and press the OK
button to confirm.
4.
cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN
button to select desired CAM, and press the OK button to view the picture
from that Camera.
TIP
Quick Method to view the Cameras instead of entering into the menu bar.
Press OK repeatedly to select
cam 1 , cam 2 , cam 3 , cam 4 , scan .