User’s Guide Digital Video Baby Monitor Models: MBP867, MBP867-2, MBP867-3, MBP867-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor! Thank you for purchasing the Motorola Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 9 8 6 4 7 5 2 3 10 14 SD 1 12 11 13 1. 2. 3. 4. 5. 6. Display (LCD screen) Vol + Key Press to adjust volume up. Vol - Key Press to adjust volume down. Menu Key M Press to open the menu options. OK key, press O Press and hold the OK key for 4 seconds, a snap shot of the display will be saved in the Micro SD card inside the DCIM folder. Video ON/OFF Key V 7. 8. 9. 10. 11. 12. 13. 14. Talk Key T Press and hold to speak to your baby.
Parent unit menu icons (cont’d) Temperature Reading (HH ºC / ºF or LL ºC / ºF) Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF < 1ºC / 34 ºF Cam Control (scan, view, add, delete) Screen viewing mode control (Single Screen, 2-split Screen) Set Video On Timer (5 min, 30 min, 60 min) Playback snap shots from memory card Overview of Your Baby Unit 5 3 4 9 7 8 1. 2. 3. 4. 5.
1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 8 2.1 2.2 2.3 3. Using the Baby Monitor........................................................................... 10 3.1 3.2 3.3 3.4 3.5 4. Set Up.........................................................................................................10 Night Vision Mode...............
1. Safety Instructions WARNING: STRANGULATION HAZARD: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away) from the crib. Do not use with an extension cord. Only use the AC Adapters provided.
ENGLISH CAMERA SET UP & USE: ● Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. ● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or mount the Unit to a wall (remove or shelf) securely using the keyhole slots under the stand. ● NEVER place the Baby Unit or cords within the crib. ● Do not place the Baby Unit within reach of the baby (the unit and cords should be more than 3 feet away).
2. Getting Started 2.1 1. 2. 3. 2.2 Baby Unit Power Supply Connect the USB plug of the power adapter to the Baby Unit (camera) and the other end to the electrical outlet. Slide the ON/OFF switch to the ON position. The power LED will light up in blue. Slide the ON/OFF switch to the OFF position to turn the Baby Unit OFF. Parent Unit Power Supply IMPORTANT Charging the Parent Unit fully before initial use is recommended. 1. 2. 3.
5. If there is no connection or you are out of range, the video display will go Off and the Unit will beep every 5 seconds. Move the Parent Unit closer to the Baby Unit until the link is re-established. Press and hold the P POWER ON/OFF button, until the progress bar finishes scrolling, to turn OFF the Parent Unit. ENGLISH 4. NOTE The battery icon turns RED to indicate that the battery is low, and will beep every 16 seconds.
3. Using the Baby Monitor 3.1 Set Up • Place the baby unit in a convenient location (ie: on a table) and point the camera lens towards the area you wish to monitor. • Adjust the Baby Unit's head angle by rotating the Camera up, down, left or right until you are satisfied with the image on the Parent Unit.
4.1 1. 4.2 1. 2. 3. 4.3 1. 2. 3. 4.4 1. 2. 3. 4.5 ENGLISH 4. Parent Unit Menu Options Volume Press the VOL UP button or VOL DOWN button to select the desired volume level, the volume will increase / decrease respectively. (The default volume level setting is 3.) TIP Another method to change volume level is by pressing the + / - on the front panel. Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > button until is highlighted.
1. 2. 3. Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select the alarm time. (The default setting is Alarm OFF.) 4.6 Camera Control 4.6.1 1. 2. 3. 4. 5. Add (pair) a Camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/add/view/scan menu will pop up.
1. 2. 3. 4.6.4 1. 2. 3. 4. View Multi-Cameras on the screen Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until icon is highlighted. Press the + UP button or - DOWN button to select 2-split screen ON/OFF. Delete a Camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/add/view/scan menu will pop up.
4.7 1. 2. 3. 4.8 1. 2. 3. 4.9 1. 2. 3. 4. 5. 6. 14 Temperature Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select °C or °F. Power Saving Mode Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video OFF after 5, 30 or 60 minutes.
ENGLISH 5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean the Baby Monitor with a slightly damp cloth or an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and Care • Do not clean any part of this product with thinners or other solvents or chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep your Baby Monitor away from hot, humid, strong sunlight and do not let the Units get wet.
ENGLISH 7. Help Display No Display • Try recharging the Parent Unit. • Reset the Units. Unplug both the units' electrical power, then plug them back in. • Is the Unit ON? Press and hold the POWER ON/OFF button P on the parent unit to turn it ON. • Is the correct Camera selected? Change the Camera number, if necessary. • Is the Video Display turned ON? Press the VIDEO ON/OFF button V to turn On.
Interference Noise interference on your parent unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet between the Units to avoid audio feedback. • lf the Baby Unit is too far away it may be out of range, move the Units closer together. • Make sure the Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
ENGLISH 8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolamonitors.com Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
What Other Limitations Are There? ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage.
FCC Part 15 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ENGLISH Technical Specifications Baby unit (Model: MBP867BU) Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 1M Pixels Lens f 2.5mm, F 2.8 IR LED 7 pcs Power Adapter: Ten Pao International Ltd. S005ANU0500100; Input: 100-240V AC, 50/60HZ 200mA; Output: 5.0V DC, 1000mA S006MU0500100; Input: 100-240V AC, 50/60HZ 300mA; Output: 5.0V DC, 1000mA WARNING Use only with the supplied power supply.
Parent unit (Model: MBP867PU) Frequency 2.4 GHz to 2.48 GHz Display 7" Diagonal Color Screen Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Power Adapter: Ten Pao International Ltd. S005ANU0500100; Input: 100-240V AC, 50/60HZ 200mA; Output: 5.0V DC, 1000mA S006MU0500100; Input: 100-240V AC, 50/60HZ 300mA; Output: 5.0V DC, 1000mA WARNING Use only with the provided power supply. Battery: Motorola, BF6X 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved. EN_US Version 11.
