user manual

Chapter 4: Device Maintenance

Select the Browse button on the Firmware Update page.

Figure 4-6 Selecting the Browse button on the Firmware Update page

Browse to the firmware file location on your network and then select the appropriate device name. For

the VMM device the SBC firmware file name will be in the format of m-kru-mea_mem-

mem_sbc_x.x.x.x.tar.

Please note that ONLY the SBC device component can be upgraded via

the web interface at this time. Use MeshManager’s Upgrade Tool to

upgrade the Transceiver, the 802.11 AP, as well as the SBC device

components. See the MOTOMESH Field Upgrade Procedure Guide

for information about updating devices via the Upgrade Tool.

Figure 4-7 Selecting the Device Firmware Filename

6881011Y54-A

4-4

September 2005